T-Komp

Dual mono compressor

The T-Komp has a unique design which offers a modern take on the old vari-mu ratio curve. The ratio is progressive and increases with the threshold level.

To make the T-Komp more useful it has two ratio ranges. The first one goes up to 20:1, perfect for instrument tracking and smashing drums etc., the second, 2:1, is a more narrow range which makes it more suitable for bus compression. The T-Komp can be selected between feed-forward mode for a punchy, modern response or feed-back mode with a smoother, more musical response. The RMS detector has five settings, four from fast to slow where number four, the slowest, is similar to the old 160VU. The fifth position is a program dependent adaptive mode.
T-Komp-R-Panel

Video

Specifications

Input impedance: 24kohm
Output impedance: 50ohm
Max in/output level: +26dBu
Frequency response: 20Hz to 20kHz +/- 0,1dB
Signal to noise ratio @ 0dBu: better than 94dB
THD: level and compression dependent, mostly even harmonics

Features

Threshold
Make-up gain: 0 to +20dB
Blend control: from dry to wet
Average timing:

  1. 1mS / 40mS (most useful for peak limiting)
  2. 5mS / 200mS
  3. 10mS / 400mS
  4. 25mS / 1000mS (similare to the old 160vu)
  5. Adaptive mode
 
The attack and release are locked in relationship to each other.

FB: selects feed-back mode
HP filter: 150Hz, -6dB octave
In: compression in/out
2:1: selects a more narrow ratio range
Gain reduction meter
Link switch
115v or 230v, selectable

Specifications and components may be changed or updated without further notice.

Downloads

Manual:
Download pdf

Recall sheet:
download pdf

Pictures:
Front T-Komp (eps), (png)
Download ZIP