fbpx

T-Komp

Dual mono compressor

The T-Komp has a unique design which offers a modern take on the old vari-mu ratio curve. The ratio is progressive and increases with the threshold level.

To make the T-Komp more useful it has two ratio ranges. The first one goes up to 20:1, perfect for instrument tracking and smashing drums etc., the second, 2:1, is a more narrow range which makes it more suitable for bus compression. The T-Komp can be selected between feed-forward mode for a punchy, modern response or feed-back mode with a smoother, more musical response. The RMS detector has five settings, four from fast to slow where number four, the slowest, is similar to the old 160VU. The fifth position is a program dependent adaptive mode.
T-Komp-R-Panel

Video

Specifications

Input impedance: 24kohm
Output impedance: 50ohm
Max in/output level: +26dBu
Frequency response: 20Hz to 20kHz +/- 0,1dB
Signal to noise ratio @ 0dBu: better than 94dB
THD: level and compression dependent, mostly even harmonics

Features

Threshold
Make-up gain: 0 to +20dB
Blend control: from dry to wet
Average timing:

  1. 1mS / 40mS (most useful for peak limiting)
  2. 5mS / 200mS
  3. 10mS / 400mS
  4. 25mS / 1000mS (similare to the old 160vu)
  5. Adaptive mode. To prevent unnecessary low frequency distortion the
    circuit acts slower for slow moving signals and faster for fast moving signals.
 
The attack and release are locked in relationship to each other.

FB: selects feed-back mode
HP filter: 150Hz, -6dB octave
In: compression in/out
2:1: selects a more narrow ratio range
Gain reduction meter
Link switch
115v or 230v, selectable

Specifications and components may be changed or updated without further notice.

Downloads

Manual:
Download pdf

Recall sheet:
download pdf

Pictures:
Front T-Komp (eps), (png)
Download ZIP